EC-COL-RThe corner post is the vertical column at each corner of a container, carrying its stacking and racking loads through the corner castings. We supply rear corner posts as separate outer and inner sections, in GP and HC heights.
Every corner of a container relies on its corner post — the vertical column forming the load path between top and bottom corner castings, and carrying the stacking and racking loads. It's also one of the most common forklift and handling damage points. We supply rear corner posts as separate outer and inner sections, in both GP and HC heights.
Replacing a corroded or impact-damaged rear corner post, and new-build fabrication.
| Material | Corten steel, 6 mm (outer) / 12 mm (inner) |
|---|---|
| Rear Corner Post — Outer | GP · 6.0 × 50 × 40 × 232 × 2400 mm · 38.1 kg / HC · 6.0 × 50 × 40 × 232 × 2700 mm · 42.5 kg |
| Rear Corner Post — Inner | GP · 12 × 113 × 40 × 2353 mm · 32.7 kg / HC · 12 × 113 × 40 × 2657 mm · 37.0 kg |
| Load Rating | Not rated as a loose component. Built into a complete corner assembly and correctly installed, the container carries up to eight fully loaded containers stacked above it |
| Standard | ISO 1496-1, ISO 1161 |
| GP | HC | |
|---|---|---|
| Outer — Dimensions | 6.0 × 50 × 40 × 232 × 2400 mm | 6.0 × 50 × 40 × 232 × 2700 mm |
| Outer — Mass | 38.1 kg | 42.5 kg |
| Inner — Dimensions | 12 × 113 × 40 × 2353 mm | 12 × 113 × 40 × 2657 mm |
| Inner — Mass | 32.7 kg | 37.0 kg |
Every twist-lock fitting, lifting lug and securing point connects through the corner casting. This replacement set of 8 covers all four corner positions, cast in -40°C low-temperature steel to ISO 1161 geometry.
EC-CC-01
Corroded or impact-damaged side cladding doesn't always need a full rebuild. This corten steel panel is profiled to match standard ISO container corrugation, in GP and HC heights, plus smaller patch panels.
EC-PAN-SW
Corroded or impact-damaged front cladding doesn't always need a full rebuild. This corten steel panel is profiled to match standard ISO container corrugation, in GP and HC heights, plus a smaller patch panel.
EC-PAN-FW
A corroded or impact-damaged roof doesn't always need a full container rebuild. This corten steel roof panel is profiled to match standard ISO container corrugation, with smaller patch panels also available.
EC-PAN-RF