Foundations & Anchoring
Dovetail shackle
A forged D-ring on a dovetail plate that slots straight into an installed dovetail slipper, giving you a rated, removable lashing point without any welding on the day.
EC-DVSH-01
Sockets, shackles, anchors
Hilti anchor rods & chemical anchor
EC-HLT-xx (see variants)Threaded anchor rods set in injectable resin — the chemical-anchor fixing that holds a boltable or anchor twistlock down to a concrete slab or foundation.
Description
Containers landed on an existing slab need a fixing that can go in after the concrete has already cured, which is exactly what a chemical anchor gives you: a threaded rod bonded into a drilled hole with injectable resin. Rod diameter follows the twistlock it's fixing — M12 for the boltable range, M20 for the anchor twistlock — and two M12 lengths mean the embedment can match a thinner or thicker slab rather than the other way round. Capacity depends on the whole system together (rod, resin, concrete grade, embedment and edge distance), so it's confirmed per project rather than quoted as a single figure.
Features
- M12 × 170 mm and M12 × 240 mm rods fix the boltable twistlock range
- M20 × 240 mm rods fix the anchor twistlock
- Two M12 lengths cover thinner and thicker slabs at the same diameter
- One resin line bonds all three rod sizes
- Rod lengths and resin are ordered individually
Where it is used
Fixing boltable and anchor twistlocks to concrete slabs, foundations and hardstanding wherever a cast-in fixing wasn't provided.
Specifications
| Rod — boltable twistlock | M12 × 170 mm and M12 × 240 mm, for thinner and thicker slabs |
|---|---|
| Rod — anchor twistlock | M20 × 240 mm |
| Material | Hilti HAS-U carbon steel threaded rod, zinc-plated |
| Chemical anchor | Two-component injectable resin cartridge — one line services all three rod sizes |
| Load Rating | Determined per installation — see the note below |
| SKUs | HLT-M12170 · -M12240 · -M20240 · -CHEM01 |
Documents & extras
- Datasheet and technical drawing — request with your quote or email us.
- 3D model (STEP) available on request.
More foundations & anchoring
All 9
Foundations & Anchoring
Corner trestle
Scaffolding-based corner jacks that level or raise a container corner by up to 250 mm, fitted with a crane or reach stacker at the time of offloading.
EC-TRES-01
Foundations & Anchoring
Deck sockets — raised
Weldable raised ISO deck sockets — single or double, side-by-side or transverse — for container stacking, compatible with manual, semi-automatic and turnfoot twistlocks, standing 110 mm proud as standard.
EC-DSKR-01
Foundations & Anchoring
Boltable raised deck socket
A raised ISO deck socket on a drilled base plate that bolts down to a slab or footing instead of welding to steel, lifting the container clear of the ground on the same casting used across our deck-socket range.
EC-BDSK-xx