EC-CJACK-01A welded steel corner jack that lifts and levels a container corner using a 10-ton hydraulic jack, raising the corner casting up to 250 mm. Use two for a pair of adjacent corners, or four for a full container lift.
This welded corner jack lifts and levels container corners without racking the box. Fit two to raise a pair of adjacent corners together — lifting only one corner at a time can twist the container — and use a full set of four for a complete container lift. Working with a 10-ton hydraulic jack, it raises the corner casting up to a maximum of 250 mm; pack the gap with weight-bearing material and repeat the lift if more height is needed. Once the container is level, the bracket lifts off and stores away.
Levelling containers on permanent or temporary sites, lifting a full container with a hydraulic jack, and gaining maintenance access underneath.
| Material | Graded steel plate — welded assembly |
|---|---|
| Lift height | Up to a maximum of 250 mm |
| Load Rating (SWL) | 10 tons (standard) / 20 tons (heavy duty) |
| Finish / Coating | Etching primer + final coat; client colour choice |
A locking variant of the corner jack: once jacked up it raises the corner by about 200 mm and locks at that height via its trestle rod, so the hydraulic jack can be removed while the container stays supported.
EC-CJTR-01
The ConFoot CFU 20 fits four self-contained hydraulic jack legs to a container, lifting it clear of any trailer or chassis and lowering it to the ground in 5–10 minutes with no crane or forklift needed, freeing the truck straight away.
EC-CONFT-CFU20-01
Side-entry lifting lugs insert into the side aperture of the bottom corner casting for safe crane lifting, rated 12.5 tons SWL per lug as certified lifting equipment — always used in sets of four.
EC-LLSE-01
Top-entry lifting lugs insert into the top corner casting and twist to lock, with a black safety slider guarding against accidental removal in use; a full set of four is rated 56 tons SWL.
EC-LLTE-01